6-50
Care and Maintenance
OG
L
0 0
Attach the Toner Hopper Shutter
1. Slide the Toner Hopper Shutter toward the back and align the two projections on
the Shutter with the oval openings on the Hopper Unit.
2. When the Shutter and Hopper Unit are aligned, push up to set the Shutter in place.
3. Set the Latch by Installing the Shaft into the square hole on the front Side of the
Shutter.
Toner Hopper
Unit
Toner Hopper
Shutter
Oval Openings
Projections
Shaft
Latch
Square Hole