Paper Handling 3-31
OG
L
0 0
Paper Pattern
Each paper tray (except the MBT) can be preset with up to 16 different patterns
(profiles) using the OCP. The settings include
Paper Size
Paper Type
Paper Color
Paper Weight
Color Control
Tray Adjust
Detach Voltage
H Positioning
All 16 patterns for all trays are set to default values and can be changed to suit your
printing requirements. To view all registered patterns select Reports / Paper Pattern
from the OCP.
Setting up your own patterns is a three stage process. First you create the pattern, then
you register it, then you load it. For instructions on creating and registering you own
pattern, start with
“Create a Registered Pattern”
below.
To use a default pattern, skip to
“Load a Registered Pattern” on page 3-33
.
Paper Pattern (With Detach Voltage Support)
Create a Registered Pattern
1.
From the OCP make the following selections:
Printer / Paper Source / Paper Pattern / Preset Load
The following screen is displayed.
2.
Select the desired Tray #. Use the
/
buttons to select the Pattern # (the
example above shows Tray 1, Pattern 2 is selected).
2
1