6-44
Care and Maintenance
OG
L
0 0
2. Clean inside the tray, especially the corners, by wiping any visible toner away
with a dry lint-free cloth.
3. Load the paper back into the tray and close the tray.
Cleaning the Toner Bottle Joint
1. Open the Toner Supply Cover.
2. Clean inside the Toner Supply Cover by wiping any visible toner away with a dry,
lint-free cloth.
3. Close the Toner Supply Cover.
Cleaning the Conveyance Belt Area (Front and Rear Engine)
1. Open the Front Cover.
2. Turn the TH Handle to the RELEASE position.
3. Remove the Drum Unit. Refer to
page 6-13
for instructions.
NOTE
:
It is very important that the conveyance belt area be cleaned daily to avoid
print quality degradation.This is especially true when using color toner.
Do not touch the Drum Wrap Sensor and the hook of the Drum Wrap
Sensor Holder, when the surrounding of the Drum Wrap Sensor is cleaned.
Toner Supply Cover
Toner Hopper Unit