3-14
Paper Handling
OG
L
0 0
3.
Push down the paper tray.
4.
Insert the paper onto the tray until it reaches the inner end of the tray.
)
5.
Select the paper size from the OCP by making the following selections:
Printer/Paper Source/Paper Size/MBT/Paper Size
6.
If the paper size you choose is custom, see
“Setting the Custom Paper Size
Values” on page 3-22
.
NOTE
:
The paper should be loaded no higher than the Max. level indicator. The
Max. level indicator is located inside the tray.
When printing on pre-punched paper, refer to
“Loading Special Media” on
page 3-17.