3-32
Paper Handling
OG
L
0 0
3.
Press the Details button. The screen on the left is displayed.
4.
Set the desired items (Paper Size, Paper Type, Paper Weight, Tray Adjust, etc.) as
desired. Use the more (
) button to toggle between the screens.
5.
When you are finished, press return (
), then enter (
). The OCP will indicate
“Processing”. When processing is complete press
to return to the main menu.
Register your pattern using the instructions below.
Registering a Paper Pattern
1.
To register a paper pattern make the following selections from the OCP:
Printer / Paper Source / Paper Pattern / Preset Register / Tray # / Pattern #
The display will appear like the samples below but will show the selected pattern
settings on the right side of the display. Use the more (
) button to toggle
between the screens and verify all settings are correct.
2.
Press enter (
) from either screen to register the pattern.The display will indicate
Processing. When processing is complete press
to return to the main menu.
NOTE
:
Refer to
page 3-23
for Tray Adjust instructions.
Refer to
page 3-28
for Color Control instructions.
Refer to
page 6-61
for Detach Voltage instructions.
Refer to
page 6-67
for H Positioning