3-22
Paper Handling
OG
L
0 0
Setting the Custom Paper Size Values
If the paper size you have selected is a custom size you must set the paper size using
the OCP. First, follow the steps for loading paper into the desired tray, then perform
these steps
1.
On the Custom Paper Size screen, touch the value box for the leading edge (the
arrow in the illustration points to the leading edge).
The Custom Paper Size Input screen is displayed.
2.
Using the number pad, enter the value for the leading edge of the paper.
3.
Press enter (
). The display returns to Custom Paper Size and the value you have
entered is shown.
4.
Touch the value box for the side edge. The display returns to Custom Paper Size
Input.
5.
Using the number pad, enter the value for the side edge of the paper.
6.
Press enter (
). The display returns to Custom Paper Size and now both values
you have entered are displayed.
7.
Press enter (
). Your custom paper size settings are now saved.
Paper Length
(Side Edge)
Paper Width
(Leading Edge)
Previous Menu
Paper Feed Direction