6-66
Care and Maintenance
OG
L
0 0
Laser Power Adjustment
The laser power is adjustable within the range from +15 to –15. Perform adjustment
according to the following procedure.
1. From the OCP, select Printer / Options / Laser Power Adj. The following screen
is displayed.
2. Select either “Front Engine” or “Rear Engine”. The following screen is
displayed.
3. The laser power is adjustable in 31 levels within the range from +15 to –15. Be
sure to set the same value for “Laser 1” and “Laser 2”. The laser line becomes
narrower than the initial value by setting to the minus value. The laser line
becomes wider than the initial value by setting to the plus value.
4. After selecting, press [
] key to fix the value.
NOTE
:
The setting is reset to “0” by pressing “Initial Value” key.