6-64
Care and Maintenance
OG
L
0 0
Print Density Adjustment
The print density is adjustable in five levels. Perform adjustment according to the
following procedure.
1. Using the OCP select Printer / Options / Print Density. The following screen is
displayed.
2. Select either “Front Engine” or “Rear Engine”. The following screen is displayed.
3. The print density is adjustable in five levels, “Light”, “Semi-Light”, “Middle”,
“Semi-Dark” and “Dark”. Select the desired print density level by pressing the
triangle button on the OCP.
4. After selecting, press [
] key to fix the value.