Printer Overview
1-5
OG
L
0 0
Key
Component
Description
1
Main Power Switch
Use to turn the system on and off.
2
Front Cover
Open to replace units, clear paper jams, or clean the inside of
the printer. (Front and Rear Printer)
3
Vertical Path Cover
Open to clear paper jams. (Front and Rear Printer)
4
Multi-bypass Tray (MBT)
Holds up to 150 sheets of paper. (Front Printer)
5
Toner Supply Cover
Open to replenish the toner supply. (Front and Rear Printer)
6
Operator Control Panel (OCP)
Displays printer status and menu information. (Front Printer)
7
Tray 1
Holds up to 2,000 sheets of paper. (Front Printer)
8
Tray 2
Holds up to 500 sheets of paper. (Front Printer)
9
Tray 3
Holds up to 500 sheets of paper. (Front Printer)
10
Switch Back Cover
Open to clear paper jams.(Front and Rear Printer)
11
Elevator Tray
Output tray.
12
High Capacity Feeder (HCF)
Holds up to 3,000 sheets of paper.
13
HCF Top Cover
Open to clear paper jams.
14
Toner Collector Bottle Cover
Open to replace the toner collector bottle.(Front and Rear
Printer)
15
Finisher
For stacking, job offset, and stapling.
16
Upper Tray
Output tray.
17
Inserter
Holds cover sheet or insert paper.
18
Booklet Tray
1
Output tray for the Booklet Finisher.
19
Relay Unit Front Cover
Open to clear paper jams.
20
Front Engine Switch
2
Use to turn the front Engine on and off.
21
Rear Engine Switch (not shown)
2
Use to turn the rear Engine on and off.
NOTE
:
1 When Booklet Finisher is installed.
2 Front and Rear Engine power switch should remain on. Use Main
Power Switch to power the system on and off.
See “Powering On the
Printer” on page 1-9
.