Paper Handling
3-11
OG
L
0 0
3.
Adjust the sensor plate to the proper size. Size markers are located on the sensor
plate in the following order:
(special), B5, A5, LGR, LGL, LTR, B4, A3, and
A4.
.
4.
Place the paper into the tray.
5.
Close the tray.
6.
If you set the sensor plate to
in
Step
3
, select the paper size from the OCP by
making the following selections:
Printer/Paper Source/Paper Size/Tray Number/Paper Size
NOTE
:
If the paper size you need is not listed, set the sensor plate to
(the first
position). Then, in
Step 8
, you will select the paper size from the OCP
display.
NOTE
:
The paper should be loaded no higher than the Max. level indicator. The
Max. level indicator is located inside the tray.