3-8
Paper Handling
OG
L
0 0
3.
Adjust the size guide to the proper size. The available sizes are marked on the
tray. Use the indicator to verify the guide is locked in place.
4.
Adjust the sensor plate to the proper size. Size markers are located on the sensor
plate in the following order:
(special), B5, LGR, LGL, LTR (LEF), B4, A3,
and A4 (LEF). Verify the setting is locked into position..
NOTE
:
If the paper size you need is not listed, set the sensor plate to
(the first
position). Then, in
Step 8
, you will select the paper size from the OCP
display.
Locked
Unlocked
Indicator
Size Guide