Paper Handling 3-23
OG
L
0 0
Setting the Tray Adjust Values
The tray adjust feature is used when it is necessary to shift the image on the printed
page. You can shift the image
–
0.25 in. (
–
6.3 mm). When printing in duplex mode,
you can set different tray adjust values for the front side and back side of the paper.
1.
To display the Tray Adjust screen, make the following selections from the OCP:
Printer/Paper Source/
/Tray Adjust/tray number
2.
On the Tray Adjust screen, touch the left-most value box. The Tray Adjust Input
screen is displayed.
3.
Using the number pad, enter the value for the feed direction of the paper. A
positive value, (+0.25) moves the image right or up and a negative value (-0.25)
moves the image to the left or down on the printed page.
4.
Press enter (
). The display returns to the Tray Adjust screen and the value you
have entered is shown.
5.
Touch the bottom-most value box. The display returns to Tray Adjust Input.
6.
Using the number pad, enter the value for the scan direction of the paper. For
example, entering + 0.25 moves the image 0.25 in. to the top of the printed page.
7.
Press enter (
). The display returns to the Tray Adjust screen and now both
values you have entered are displayed.
8.
Press enter (
). Your tray adjust settings are now saved.
Paper Length
Previous Menu
Enter or Accept
Front Side Adjust
Back Side Adjust
Paper Width
Previous Menu
Enter or Accept
Ten Key Pad