![background image](/i/dell/154997/dell-1135n/h/dell-1135n-104.png)
5.
6.
Turn the machine off and turn it on again.
7.
Reinstall your printer driver.
Setting IPv6 addresses
Machine supports following IPv6 addresses for network printing and managements.
Link-local Address
: Self-configured local IPv6 address (Address starts with FE80).
Stateless Address
: Automatically configured IPv6 address by a network router.
Stateful Address
: IPv6 address configured by a DHCPv6 server.
Manual Address
: Manually configured IPv6 address by a user.
DHCPv6 address configuration (Stateful)
If you have a DHCPv6 server on your network, you can set one of the following option for default dynamic host
configuration:
1.
Press
Menu (
) on the control panel.
2.
Press the left/right arrow until
Network
appears and press
OK
.
3.
Press the left/right arrow until
TCP/IP (IPv6)
appears and press
OK
.
4.
Press the left/right arrow until
DHCPv6 Config
appears and press
OK
.
5.
Press the left/right arrow to access the required value.
Router
: Use DHCPv6 only when requested by a router.
DHCPv6 Addr.
: Always use DHCPv6 regardless of router request.
DHCPv6 Off
: Never use DHCPv6 regardless of router request.
6.
Press
OK
.
Manual address configuration
1.
Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL (See
For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or
click
Go
.
2.
When the
Embedded Web Service
window opens, click
Network Settings
.
3.
Click
TCP/IP
.
4.
Enable the
Manual Address
In the
TCP/IPv6
section.
5.
Select the
Router Prefix
and click the
Add
button, then the router prefix will automatically be entered into
the address field.
Enter the rest of address (ex:3FFE:10:88:194::
AAAA
. “A” is the hexadecimal 0 through 9, A through F).
6.
Click the
Apply
button.
Connecting
Embedded Web Service
1.
Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL.
2.
Select one of the IPv6 addresses (
Link-local Address
,
Stateless Address
,
Stateful Address
,
Manual
Address
) from
Network Configuration Report
.
3.
Enter the IPv6 addresses (ex: http://[FE80::215:99FF:FE66:7701]).
Address must be enclosed in '[ ]' brackets.