2.
Load originals face up into the document feeder, or place a single original face down on the scanner glass.
3.
Adjust the resolution and the darkness to suit your fax needs (See
Adjusting the document settings
4.
Press
Menu (
)
on the control panel.
5.
Press the left/right arrow until
Fax Feature
appears and press
OK
.
6.
Press the left/right arrow until
Delay Send
appears and press
OK
.
7.
Enter the number of the receiving fax machine and press
OK
.
You can press speed dial numbers or select group dial number using
Address book
button. For details, see
8.
The display asks you to enter another fax number to send the document.
9.
To enter more fax numbers, press
OK
when
Yes
appears and repeat steps 7. You can add up to 10 destinations.
Once you entered a group dial number, you cannot enter another group dial numbers anymore.
10.
When you have finished entering fax numbers, press the left/right arrow to select
No
at the
Another No.?
prompt and press
OK
.
11.
Enter the job name you want and press OK.
For details on how to enter alphanumeric characters, see
Entering characters using the number keypad
If you do not want to assign a name, skip this step.
12.
Enter the time using the number keypad and press OK.
If you set a time earlier than the current time, the fax will be sent at that time on the following day.
The original is scanned into memory before transmission.
13.
If an original is placed on the scanner glass, select
Yes
to add another pages. Load another original and press
OK
.
When you have finished, select
No
at the
Another Page?
prompt.
The machine returns to ready mode. The display reminds you that you are in ready mode and that a delayed fax
is set.
Adding documents to a reserved delay fax job
You can add additional documents to the delayed fax job which is saved in memory.
1.
Load the originals to be added and adjust document settings.
2.
Press Menu (
)on the control panel.
3.
Press the left/right arrow until
Fax Feature
appears and press
OK
.
4.
Press the left/right arrow until
Add pages
appears and press
OK
.
5.
Press the left/right arrow until the fax job you want appears and press
OK
.
When you have finished, select
No
at the
Another Page?
prompt. The machine scans the original into
memory.
6.
Press
Stop/Clear (
)
to return to ready mode.
Canceling a reserved delay fax job
You can cancel the delayed fax job which is saved in memory.
1.
Press Menu (
) on the control panel.
2.
Press the left/right arrow until
Fax Feature
appears and press
OK
.
3.
Press the left/right arrow until
Cancel Job
appears and press
OK
.
4.
Press the left/right arrow until the fax job you want appears and press
OK
.
5.
Press
OK
when
Yes
appears.
The selected fax is deleted from memory.
6.
Press
Stop/Clear (
)
to return to ready mode.
Sending a priority fax
This function is used when a high priority fax need to be sent ahead of reserved operations. The original is scanned
into memory and immediately transmitted when the current operation is finished. In addition, priority transmission
will interrupt a sending to multiple destinations between stations (example, when the transmission to station A ends,
before transmission to station B begins) or between redial attempts.
1.
Press
Fax
(
) on the control panel.
2.
Load originals face up into the document feeder, or place a single original face down on the scanner glass.
3.
Adjust the resolution and the darkness to suit your fax needs (See
Adjusting the document settings
4.
Press Menu (
)on the control panel.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
Инструкции и руководства похожие на DELL 1135n
