7 (E)



 LAMP button

This controls the ON and OFF of the halogen lamp 
which is connected to the pan/tilt head system currently 
selected.
Each time it is pressed, the lamp is turned ON or OFF in 
turn.
When the halogen lamp is ON, the button’s lamp comes 
on; when it is OFF, the lamp goes off.
It flashes when the halogen lamp has not been 
connected or when the lamp has been disconnected or 
some other problem has occurred.



 DEF button

This sets the defroster function ON or OFF when a 
pan/tilt head (AW-PH600/AW-PH650) equipped with a 
defroster function is used in the pan/tilt head system 
currently selected.
Each time it is pressed, the function is turned ON or OFF 
in turn.
When the defroster is ON, the button’s lamp comes on; 
when it is OFF, the lamp goes off.



 WIP button

This sets the wiper function ON or OFF when a pan/tilt 
head (AW-PH600/AW-PH650) equipped with a wiper 
function is used in the pan/tilt head system currently 
selected.
Each time it is pressed, the function is turned ON or OFF 
in turn.
When the wiper is ON, the button’s lamp comes on; 
alternatively, when it is OFF, it goes off.



 H/F button

This sets the heater/fan function ON or OFF when a  
pan/tilt head (AW-PH600/AW-PH650) equipped with a 
heater/fan function is used in the pan/tilt head system 
currently selected.
Each time it is pressed, the function is turned ON or OFF 
in turn.
When the heater/fan is ON, the button’s lamp comes on; 
when it is OFF, the heater/fan goes off.



 EXT (AF) button

If a lens with an extender function is used in the selected 
pan/tilt head system, the extender function is set from ON 
to OFF or vice versa each time the EXT (AF) button is 
pressed.
If a lens (AW-LZ16AF7G) with an AF function is used in 
the selected pan/tilt head system, the AF function of the 
lens is set from ON to OFF or vice versa each time the 
EXT (AF) button is pressed.
In either case, the button lamp is lit at the ON setting, and 
it is extinguished at the OFF setting.
  This button can be used to turn the AF function ON or 

OFF only when the AW-PH350/AW-PH360/AW-PH650 
pan/tilt head is connected. 
When the pan/tilt head is not used and only the camera 
is connected, select ON or OFF using the menu item.



 ND button

This sets the ND filter function ON or OFF when a lens 
equipped with an ND filter function is used in the pan/tilt 
head system currently selected.
Each time it is pressed, the function is turned ON or OFF 
in turn.
When the ND filter is ON, the button’s lamp comes on; 
when it is OFF, the lamp goes off.
The ND filter function on the AW-E655 cannot be 
switched. Use the camera setting menu to turn it ON or 
OFF.



 OPTION button

This controls the short- or open-circuiting of the OPTION 
SW CONTROL OUT connector of the AC adapter  
(AW-PS300A) which is connected to the pan/tilt head 
system currently selected.
Each time it is pressed, short-circuiting or open-circuiting 
is selected in turn.
When the connector is short-circuited, the button’s lamp 
comes on; when it is open-circuited, the lamp goes off.

Parts and their functions