42 (E)

ENGLISH

Power supply: 

DC 10.8 V to DC 16 V

Power consumption:  9.0 W

General

Ambient operating temperature
  –10°C to +50°C
Storage temperature
  –20°C to +60°C
Ambient operating humidity
  30% to 90% (no condensation)
Weight
  3.5 kg
Dimensions (WHD)
  42052220 mm
Finish
  AV ivory paint (colour resembling Munsell 7.9Y 6.8/0.8)
Pan/tilt heads supported
   AW-PH300, AW-PH300A, AW-PH350, AW-PH360,  

AW-PH500, AW-PH600, AW-PH650

Cameras supported
   AW-E300, AW-E300A, AW-E600, AW-E800, AW-E800A, 

AW-E350, AW-E650, AW-E655, AW-E750, AW-E860

Input connectors

DC 12V IN socket
  XLR, 4-pin
GND
  Connect this to ground for use.

Output connectors

MONITOR SELECT connector
   RJ45 

Connecting cable: 
10BASE-T straight cables (UTP category 5),  
max. 50 meters

Input/Output connectors

TO CONTROL PANEL [IN/OUT] connectors
   RJ45 (1 each) 

Connecting cable: 
10BASE-T straight cables (UTP category 5),  
max. 1,000 meters 
When more than one additional panel is to be connected, 
make sure that the total length of all the cables does not 
exceed 1,000 meters.

TALLY/INCOM
  D-SUB, 15-pin
REMOTE/SERVICE
  RS-232C
TO PAN/TILT HEAD [1/EXT, 2 to 5] connectors
   RJ45 5, control signal output for pan/tilt heads 

Connecting cable: 
10BASE-T straight cables (UTP category 5),  
max. 1,000 meters

INCOM
  XLR, 4-pin

Other

TERMINATION switch
   Termination setting for communication line with control 

panel

ID switch
  Operations mode (MAIN, 1, 2) setting.
REMOTE/SERVICE switch
  Maintenance switch. Set in the “N” position during use.

Weight and dimensions shown are approximate.
Specifications are subject to change without notice.

Specifications

 indicates safety information.