10 (E)

ENGLISH

Parts and their functions



 TALLY lamps [1] to [5]

When tally signals are input to TALLY connectors [1] 
through [5], the lamps with the numbers corresponding to 
the connectors come on.



  CONTROL/PREVIEW MONITOR OUT SEL 

buttons [1] to [5], [AUX]

Pressing buttons 1 to 5 will select the connected pan/tilt 
head system. 
When the AW-RC400 is connected, the button of the 
chosen number will illuminate and the video signal from 
the selected pan/tilt head system will be output to the 
AW-RC400’s MONITOR OUT 1 to 2 terminals. 
The AUX switch will not function in a system made with 
the AW-RC400.



 PRIORITY button

The pan/tilt head may be controlled by pressing this 
button when multiple additional panels are connected to 
this unit. 
This light will come one in control mode and will turn off 
in non-control mode. 
This button’s light is always on when there are no 
additional panels connected to this unit.



 SPEED button

This is used to select the control (pan, tilt, zoom, focus, 
iris) speed of the pan/tilt head system currently selected.
Each time it is pressed, the high-speed mode or  
low-speed mode is selected in turn.
The button’s lamp comes on in the low-speed mode, and 
it remains off in the high-speed mode.
Using the SPEED SELECT item on the setting menu, the 
speed can be set in one of three steps for the high-speed 
mode and for the low-speed mode.