39 (E)

SPEED WITH ZOOM POS. (OFF, 1, 2)
When 1 or 2 is selected as this item’s setting, the pan/tilt 
operation of the pan/tilt head system is slowed down so that 
the pan/tilt position will be more easily aligned when the lens 
zoom is at the wide-angle position.

DIAGONAL MOTION (ON/OFF)
OFF :  The pan/tilt head system moves to the position set in 

the preset memory at maximum speed.

ON  :  The speed at which the pan/tilt head system moves is 

adjusted so that it will move to the position set in the 
preset memory in a straight line. 
However, repeatability with the AW-PH350 pan/tilt  
head will be ±10´, resulting in lower stopping 
accuracy.

DIAGONAL SPEED (1 to 30)
This item is used to select the speed at which the pan/tilt 
head system is to operate when DIAGONAL MOTION item 
has been set to ON. The higher the value set, the faster the 
speed at which the pan/tilt head will operate.
When DIAGONAL MOTION item has been set to OFF, 
operational speed cannot be set.

CAMERA SETTING menu

The operation items differ depending on the type of camera 
or pan/tilt head used and the optional card installed.
For further details, refer to the operating instructions of the 
camera used.

Setting menus

<Note>
The DIAGONAL MOTION and DIAGONAL SPEED items 
appear when the AW-PH350 is used as the pan/tilt head.