32 (E)

ENGLISH

Operation

1.   Select the pan/tilt head system using the CONTROL/ 

PREVIEW MONITOR OUT SEL button.

2.   Press the TR/PSET button to establish the preset 

memory mode (the TR/PSET button’s lamp now goes 
off). 
If the M.LOCK button’s lamp lights, press the M.LOCK 
button to establish the memory entry mode (the M.LOCK 
button’s lamp now goes off).

3.   Set the unit to a state in which the RESET button is held 

down. 
When the RESET button is pressed, those buttons 
among the TRACING/PRESET MEMORY buttons 1 
through 50 in which data can be deleted start flashing in 
sequence.

If a button has a lamp that remains off, it means that 
data has already been entered into it. The preset 
memory data cannot be deleted.

4.   While the RESET button is held down, press the button 

in which the preset memory data is to be deleted.

5.  If necessary, delete other preset memory data as well.

Deleting preset memory data