14 (E)

ENGLISH

Connections

   Use the AW-PS505A (sold separately) AC adapter for this 

unit and the AW-PS300A (sold separately) for the pan/tilt 
head.

   Use a DC power cable (which has a nominal cross-

sectional area of at least 1.25 mm

2

 and which complies 

with the Electrical Appliance and Material Control Law) to 
connect the AW-PH360 pan/tilt head and AW-PS300A  
AC adapter. 
The maximum extension distance between the AC 
adapter for the pan/tilt head and the pan/tilt head itself is 
30 meters.

   Connect the AW-PH360 pan/tilt head and convertible 

camera using the camera cable supplied with AW-PH360.

   Connect the iris control cable of the motorized zoom lens 

to the camera and the remote (zoom/focus control) cable 
to the pan/tilt head.

   When using the AW-PH360 as the pan/tilt head, set 

the controller selector switch on the AW-PH360 to “For 
AW-RP605A”.

Turn off the power of all components before 
proceeding with the connections.

For further details on how to connect each component, 
refer to the operating instructions of the component 
concerned.