12 (E)
ENGLISH
Parts and their functions
TERMINATION switch (Setting at shipment: 2)
Termination switch for the control signal communicating with the additional panel.
How to set the TERMINATION switch () and ID switch ()
(1) Set this switch to “2” when there are no additional panels connected to this unit.
(2) Set this switch and the additional panel TERMINATION switch to “1” when there is 1 additional panel connected to this
unit.
(3) Set the TERMINATION switches on the equipment on both sides of the connection to “1” when 2 additional panels are
connected to this unit and set the TERMINATION switches of devices in the middle of the connection to “OFF.”
or