30 (E)
ENGLISH
1. Select the pan/tilt head system using the CONTROL/
PREVIEW MONITOR OUT SEL button.
2. While holding down the RESET button, press the buttons
in which the tracing memory data to be deleted has been
entered.
The lamps of the buttons in which tracing memory
data has been entered (TRACING/PRESET MEMORY
buttons 1 through 10) come on when the RESET
button is pressed.
3. The buttons’ lamps go off, and the tracing memory data
is deleted.
Data cannot be deleted while the M.LOCK button’s
lamp is lit.
Deleting tracing memory data
Operation
