38 (E)

ENGLISH

P/T SETTING (pan/tilt head setting) 

menu

PAN DIRECTION (NORMAL/REVERSE)
This item is used to select the operations in the horizontal 
direction of the pan/tilt head system which are to be 
performed by operating the PAN/TILT lever.
When NORMAL is selected as the setting, the pan/tilt head 
system moves toward the left when the PAN/TILT lever is 
tilted toward the L side, and it moves toward the right when it 
is tilted toward the R side.
Conversely, when REVERSE is selected as the setting, the 
pan/tilt head system moves in the reverse directions.

Always select REVERSE as the setting when using the  
AW-PH300 as the pan/tilt head system in the stand-alone 
installation. In this case, when REVERSE is selected as 
the setting, the pan/tilt head system moves toward the left 
when the PAN/TILT lever is tilted toward the L side, and it 
moves toward the right when it is tilted toward the R side. 
Conversely, when NORMAL is selected as the setting, the 
pan/tilt head system moves in the reverse directions.

TILT DIRECTION (NORMAL/REVERSE)
This item is used to select the operations for the vertical 
direction of the pan/tilt head system which are to be 
performed by manipulating the PAN/TILT lever.
When NORMAL is selected, the pan/tilt head system moves 
upward when the PAN/TILT lever is tilted toward the UP side, 
and it moves downward when it is tilted toward the DOWN 
side.
Conversely, when REVERSE is selected, the pan/tilt head 
system moves in the reverse directions.

Always select REVERSE as the setting when using the  
AW-PH300 as the pan/tilt head system for suspended 
installation. In this case, when REVERSE is selected, the 
pan/tilt head system moves upward when the PAN/TILT 
lever is tilted toward the UP side, and it moves downward 
when it is tilted toward the DOWN side.  
Conversely, when NORMAL is selected, the pan/tilt head 
system moves in the reverse directions.

ZOOM DIRECTION (NORMAL/REVERSE)
This item is used to select the zoom movements of the lens 
which are to be performed by operating the ZOOM lever.
When NORMAL is selected as the setting, the zoom moves 
toward the telephoto side when the ZOOM lever is tilted 
toward the TELE side, and it moves toward the wide-angle 
side when it is tilted toward the WIDE side.
Conversely, when REVERSE is selected as the setting, the 
zoom moves in the reverse directions.

FOCUS DIRECTION (NORMAL/REVERSE)
This item is used to select the focus operations of the lens 
which are to be performed by operating the dials on the top 
of the PAN/TILT lever and ZOOM lever.
When NORMAL is selected, the focus moves toward the  
far-distance side when the dial is turned toward the FAR 
side, and it moves toward the near-distance side when it is 
turned toward the NEAR side.
Conversely, when REVERSE is selected as the setting, the 
focus moves in the reverse directions.

IRIS DIRECTION (NORMAL/REVERSE)
This item is used to select the focus operations of the lens 
which are to be performed by operating the dials on the top 
of the PAN/TILT lever and ZOOM lever.
When NORMAL is selected for the setting, turn the dial 
towards OPEN to open up the iris and towards CLOSE to 
close in the iris.
Conversely, when REVERSE is selected as the setting, the 
iris moves in the reverse directions.
As the focusing of some lenses moves in reverse, select the 
setting which best suits the operator.

SPEED SELECT (PAN)

(HIGH: SLOW/MID/FAST; LOW: SLOW/MID/FAST)
This item is used to select the speed at which the pan/tilt 
head system is to operate in the horizontal direction in 
response to operation of the PAN/TILT lever.
The speed can be set to SLOW, MID or FAST for the HIGH 
mode and also for the LOW mode which are switched using 
the SPEED button.

When 1 or 2 has been selected as the SPEED WITH 
ZOOM POS. item setting, switching between SLOW, MID 
and FAST is not possible.

SPEED SELECT (TILT) 

(HIGH: SLOW/MID/FAST; LOW: SLOW/MID/FAST)
This item is used to select the speed at which the pan/tilt  
head system is to operate in the vertical direction in 
response to operation of the PAN/TILT lever.
The speed can be set to SLOW, MID or FAST for the HIGH 
mode and also for the LOW mode which are switched using 
the SPEED button.

When 1 or 2 has been selected as the SPEED WITH 
ZOOM POS. item setting, switching between SLOW, MID 
and FAST is not possible.

SPEED SELECT (ZOOM) 

(HIGH: SLOW/MID/FAST; LOW: SLOW/MID/FAST)
This item is used to select the speed at which the lens is 
to perform zoom operations in response to operation of the 
ZOOM lever.
The speed can be set to SLOW, MID or FAST for the HIGH 
mode and also for the LOW mode which are switched using 
the SPEED button.

SPEED SELECT (FOCUS) 

(HIGH: SLOW/MID/FAST; LOW: SLOW/MID/FAST)
This item is used to select the speed at which the lens is to 
perform the focusing operations in response to operation of 
the dials on the top of the PAN/TILT lever and ZOOM lever.
The speed can be set to SLOW, MID or FAST for the HIGH 
mode and also for the LOW mode which are switched using 
the SPEED button.

Setting menus