Chapter 2 Hardware Installation and Connections
IES-6000M User’s Guide
28
1
Failure to use the proper screws may damage the unit.
2.2.2 Mounting the IES-6000M on a Rack
• Make sure that nothing obstructs the airflow of the main chassis.
• If you are facing the IES-6000M front panel, the fan intake vents are located on the bottom
of the front and side panels of the unit. The fan exhaust vents are located on the top of the
front and side panels, right above the fan module.
Figure 4
Main Chassis Airflow
Use the following procedure to install the main chassis in the rack.
"
Install the main chassis and splitter chassis in a rack with the splitter chassis
directly below the main chassis.
