Chapter 2 Hardware Installation and Connections
IES-6000M User’s Guide
47
Figure 25
Installation Scenario A
Use the following procedure for this MDF installation scenario.
1
Connect the Telco-50 connector end of the cable to the Telco-50 connector labeled
USER
.
2
Connect the wiring on the other end of the Telco-50 cable to the upper ports of the MDF
using a punch-down tool.
3
Connect the telephone wiring from each end-user’s DSL modem to the lower ports of the
MDF.
2.4.8.2 Installation Scenario B
Phone service is available. There is one MDF from which end-users CO connections are made
(see next figure). This installation scenario does not apply to G.SHDSL connections.
Figure 26
One MDF for End-user and CO Connections
