Chapter 2 Hardware Installation and Connections
IES-6000M User’s Guide
56
4
Connect the other ends of the power wires to the –36 V terminal on the power supply.
5
Connect power wires to the positive power terminals on the front of the IES-6000 power
module, and tighten the terminal screw.
6
Connect the other ends of the power wires to the ground terminal on the power supply.
7
Push the power module back in and tighten the screws.
8
Repeat the previous steps for the second power supply module.
Figure 35
Sliding Out the IES-6000 Power Module
Figure 36
Connecting the Power Wires to the IES-6000 Power Module
