Appendix A Product Specifications

IES-6000M User’s Guide

72

System Specifications

This section provides the specifications for the IES-6000.

Main chassis 
dimensions

440 mm (W) x 280 mm (D) x 484 mm (H)
12U

Splitter chassis 
dimensions

IES-3000ST: 442.7 mm (W) x 280 mm (D) x 222.5 mm (H); 5U
IES-3016ST: 434.1 mm (W) x 280 mm (D) x 219.4 mm (H); 5U

Chassis weight
(including fan and power 
module weight; 
excluding card weights)

18 kg

Splitter chassis weight 
(excluding card weights)

IES-3000ST: 10.8 kg
IES-3016ST: 11.8 kg

Number of slots

Total 17 (15 ~ 16 line card slots plus 1 ~ 2 management card slots).

Rack mounting

The IES-6000 is 19-inch (482.6 mm) or 23-inch (584.2 mm) rack-
mountable.

Wire gauge 
specifications

AWG (American Wire Gauge) is a measurement system for wire that 
specifies its thickness. As the thickness of the wire increases, the AWG 
number decreases. 
Make sure you use wires of the specified wire gauge.
Ground wire: 6 AWG or larger
Telephone wire: 26 AWG or larger
Power wire: 6 AWG or larger (two pairs of wires are required to support full 
power)

Power consumption 
(Max)

2160 Watts
60 Amps
-36 to -72 Volts DC, no tolerance 

Backplane

The backplane has 16 1-Gigabit Ethernet ports.

Telco-50 cable 
specifications (optional)

Long: 

93 cm

Medium: 

53 cm

Short: 

13 cm

180-degree cable (for VOP-1248G splitter rear panel):

60cm

Operating Environment

Temperature: 0°C ~ 50°C
Humidity: 10% - 90% RH (non-condensing)

Storage Environment

Temperature: -40°C ~ 70°C
Humidity: 10% - 95% RH (non-condensing)