![background image](/i/zyxel/148487/zyxel-ies-6000/h/zyxel-ies-6000-062.png)
Chapter 3 Maintenance
IES-6000M User’s Guide
60
Figure 38
Remove the IES-6000 Fan Module
Figure 39
IES-6000 Fan Module (Location of Fuse Indicated)
3.1.2 Procedure to Remove and Install the Filters
The IES-6000M has three filters, one located at the bottom of the front panel and two located
at the bottom of the two side panels. The filter on the front panel is different than the filters on
the side panels, so make sure you order the correct filter(s).
To clean or replace the filter on the front panel, loosen the thumbscrews on the front of the
filter, and remove the filter. Clean or replace it as necessary.
To clean or replace a filter on the side panel, you have to remove the one at the bottom of the
front panel first. Then, slide out the filter along the side panel, and clean or replace it as
necessary.