![background image](/i/zyxel/148487/zyxel-ies-6000/h/zyxel-ies-6000-036.png)
Chapter 2 Hardware Installation and Connections
IES-6000M User’s Guide
36
Figure 15
Tightening Splitter Chassis Card Thumbscrews
2.3.4 Removing a Splitter Chassis Card
Use the following procedure to remove a splitter or extension card from the splitter chassis.
1
Disconnect the cable from the card.
2
Loosen the two thumbscrews.
3
Grasp the handles on the front panel of the card and start to pull the card out.
4
After you have the card partially out of the splitter chassis, place one hand under the card
to support it.
5
Slide the card out of the slot.
Figure 16
Loosening Splitter Chassis Card Thumbscrews