Chapter 8 LAN Setting
NWA3000-N Series User’s Guide
109
Each field is described in the following table.
Table 34
Configuration > LAN Setting
LABEL
DESCRIPTION
IP Address
Assignment
Get
Automatically
This option appears when the
MGNT Mode
is set to
Stand Alone AP
.
Select this to make the interface a DHCP client and automatically get
the IP address, subnet mask, and gateway address from a DHCP
server.
Use Fixed IP
Address
Select this if you want to specify the IP address, subnet mask, and
gateway manually. You can only configure a fixed IP address when the
MGNT Mode
is set to
Stand Alone AP
.
IP Address
Enter the IP address for this interface.
Subnet Mask
Enter the subnet mask of this interface in dot decimal notation. The
subnet mask indicates what part of the IP address is the same for all
computers in the network.
Gateway
Enter the IP address of the gateway. The NWA3000-N series AP sends
packets to the gateway when it does not know how to route the
packet to its destination. The gateway should be on the same network
as the interface.
DNS Server
Settings
Use this section to specify the IP addresses for the NWA3000-N series
AP to use. Use one of the following ways to specify these IP
addresses.
User-Defined
- enter a static IP address.
From ISP
- select the DNS server that another interface received
from its DHCP server.
Add
Click this to create a new entry. Select an entry and click
Add
to
create a new entry after the selected entry.
Edit
Double-click an entry or select it and click
Edit
to be able to modify
the entry’s settings.
Remove
To remove an entry, select it and click
Remove
. The NWA3000-N
series AP confirms you want to remove it before doing so. Note that
subsequent entries move up by one when you take this action.
Move
To change an entry’s position in the numbered list, select the entry
and click
Move
to display a field to type a number for where you want
to put it and press [ENTER] to move the rule to the number that you
typed.
#
This is the index number of the DNS server address entry. The
ordering of your entries is important as the NWA3000-N series AP
uses them in sequence.
A hyphen (-) displays for the default DNS server address entry. The
NWA3000-N series AP uses this default entry if it cannot get a reply
for any of the other servers.
Type
This displays whether the DNS server IP address is assigned by a
DHCP server dynamically (
From DHCP
), is configured manually
(
User-Defined
), or is the default entry the NWA3000-N series AP
uses if it cannot get a reply for any of the other servers.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
