![background image](/i/zyxel/149189/zyxel-nwa3550-n/h/zyxel-nwa3550-n-140.png)
Chapter 11 User
NWA3000-N Series User’s Guide
140
To access this screen, go to the
User
screen, and click
Add
or
Edit
.
Figure 63
Configuration > User > User > Add/Edit A User
The following table describes the labels in this screen.
Table 49
Configuration > User > User > Add/Edit A User
LABEL
DESCRIPTION
User Name
Type the user name for this user account. You may use 1-31
alphanumeric characters, underscores(
_
), or dashes (-), but the first
character cannot be a number. This value is case-sensitive. User
names have to be different than user group names, and some words
are reserved.
User Type
Select what type of user this is. Choices are:
•
admin
- this user can look at and change the configuration of the
NWA3000-N series AP
•
limited-admin
- this user can look at the configuration of the
NWA3000-N series AP but not to change it
•
user
- this is used for embedded RADIUS server and SNMPv3 user
access
Password
This field is not available if you select the
ext-user
or
ext-group-
user
type.
Enter the password of this user account. It can consist of 4 - 31
alphanumeric characters.
Retype
Re-enter the password to make sure you have entered it correctly.
Description
Enter the description of each user, if any. You can use up to 60
printable ASCII characters. Default descriptions are provided.
Authentication
Timeout Settings
If you want to set authentication timeout to a value other than the
default settings, select
Use Manual Settings
then fill your preferred
values in the fields that follow.