Chapter 11 User
NWA3000-N Series User’s Guide
143
User Type
These are the kinds of user account the NWA3000-N series AP
supports.
•
admin
- this user can look at and change the configuration
of the NWA3000-N series AP
•
limited-admin
- this user can look at the configuration of
the NWA3000-N series AP but not to change it
•
user
- this is used for embedded RADIUS server and
SNMPv3 user access
Lease Time
This is the default lease time in minutes for each type of user
account. It defines the number of minutes the user has to
renew the current session before the user is logged out.
Admin users renew the session every time the main screen
refreshes in the Web Configurator.
Reauthentication
Time
This is the default reauthentication time in minutes for each
type of user account. It defines the number of minutes the
user can be logged into the NWA3000-N series AP in one
session before having to log in again. Unlike
Lease Time
, the
user has no opportunity to renew the session without logging
out.
User Logon Settings
Limit the number of
simultaneous logons
for administration
account
Select this check box if you want to set a limit on the number
of simultaneous logins by admin users. If you do not select
this, admin users can login as many times as they want at the
same time using the same or different IP addresses.
Maximum number per
administration
account
This field is effective when
Limit ... for administration
account
is checked. Type the maximum number of
simultaneous logins by each admin user.
User Lockout Settings
Enable logon retry
limit
Select this check box to set a limit on the number of times
each user can login unsuccessfully (for example, wrong
password) before the IP address is locked out for a specified
amount of time.
Maximum retry count
This field is effective when
Enable logon retry limit
is
checked. Type the maximum number of times each user can
login unsuccessfully before the IP address is locked out for the
specified
lockout period
. The number must be between 1 and
99.
Lockout period
This field is effective when
Enable logon retry limit
is
checked. Type the number of minutes the user must wait to try
to login again, if
logon retry limit
is enabled and the
maximum retry count
is reached. This number must be
between 1 and 65,535 (about 45.5 days).
Apply
Click
Apply
to save the changes.
Reset
Click
Reset
to return the screen to its last-saved settings.
Table 50
Configuration > Object > User > Setting (continued)
LABEL
DESCRIPTION