Chapter 1 Introduction
NWA3000-N Series User’s Guide
24
The following figure illustrates a CAPWAP wireless network. The user (
U
)
configures the controller AP (
C
), which then automatically updates the
configurations of the managed APs (
M1
~
M4
).
Figure 7
CAPWAP Network Example
1.4 Ways to Manage the NWA3000-N series AP
You can use the following ways to manage the NWA3000-N series AP.
Web Configurator
The Web Configurator allows easy NWA3000-N series AP setup and management
using an Internet browser. This User’s Guide provides information about the Web
Configurator.
Command-Line Interface (CLI)
The CLI allows you to use text-based commands to configure the NWA3000-N
series AP. You can access it using remote management (for example, SSH or
Telnet) or via the console port. See the Command Reference Guide for more
information.
U
C
M1
M2
M3
M4