![background image](/i/zyxel/149189/zyxel-nwa3550-n/h/zyxel-nwa3550-n-113.png)
Chapter 9 Wireless
NWA3000-N Series User’s Guide
113
9.3 AP Management
Use this screen to manage all of the APs connected to the NWA3000-N series AP.
Click
Configuration > Wireless > AP Management
to access this screen. This
screen manages the NWA3000-N series AP’s general wireless settings if it is in
standalone mode or the general wireless settings of all of the NWA3000-N series
AP’s managed APs if the NWA3000-N series AP is in controller mode.
Figure 44
Configuration > Wireless > AP Management (Controller Mode)
The following fields display if the NNWA3000-N series AP is in controller mode.
Table 37
Configuration > Wireless > AP Management (Controller Mode)
LABEL
DESCRIPTION
Edit
Select an AP and click this button to edit its properties.
Remove
Select an AP and click this button to remove it from the list.
Note: If in the
Configuration > Wireless > Controller
screen
you set the
Registration Type
to
Always Accept
, then as
soon as you remove an AP from this list it reconnects.
Reboot
Select an AP and click this button to force it to restart.
#
This field is a sequential value, and it is not associated with any
interface.
IP Address
This field displays the IP address of the AP.
MAC
This field displays the MAC address of the AP.
Model
This field displays the AP’s hardware model information. It displays
“N/A” (not applicable) only when the AP disconnects from the
NWA3000-N series AP and the information is unavailable as a result.
R1 Mode / Profile
This field displays the AP or MON profile for Radio 1.
R2 Mode / Profile
If the NWA3000-N series AP has a second radio this field displays the
AP or MON profile for Radio 2.
Mgnt. VLAN ID
This field displays the ID of the AP’s management VLAN.
Description
This field displays the AP’s description, which you can configure by
selecting the AP and clicking the
Edit
button.