![background image](/i/zyxel/149189/zyxel-nwa3550-n/h/zyxel-nwa3550-n-134.png)
Chapter 10 Device HA
NWA3000-N Series User’s Guide
134
10.3.1 Edit Monitored Interface
This screen lets you enable or disable monitoring of an interface and set the
interface’s management IP address and subnet mask. To access this screen, click
Configuration > Device HA > Active-Passive Mode > Edit
.
Figure 59
Device HA > Active-Passive Mode > Edit Monitored Interface
Password
Enter the password used for verification during synchronization. Every
NWA3000-N series AP in the virtual router must use the same
password.
If you leave this field blank in the master NWA3000-N series AP, no
backup NWA3000-N series APs can synchronize from it.
If you leave this field blank in a backup NWA3000-N series AP, it cannot
synchronize from the master NWA3000-N series AP.
Auto
Synchronize
Select this to get the updated configuration automatically from the
specified NWA3000-N series AP according to the specified
Interval
.
The first synchronization begins after the specified
Interval
; the
NWA3000-N series AP does not synchronize immediately.
Interval
When you select
Auto Synchronize
, set how often the NWA3000-N
series AP synchronizes with the master.
Apply
This appears when the NWA3000-N series AP is currently using active-
passive mode device HA. Click
Apply
to save your changes back to the
NWA3000-N series AP.
Reset
Click
Reset
to return the screen to its last-saved settings.
Table 45
Configuration > Device HA > Active-Passive Mode (continued)
LABEL
DESCRIPTION