Chapter 15 System
NWA3000-N Series User’s Guide
196
New Date
(yyyy-mm-dd)
This field displays the last updated date from the time server or the
last date configured manually.
When you set
Time and Date Setup
to
Manual
, enter the new date
in this field and then click
Apply
.
Get from Time
Server
Select this radio button to have the NWA3000-N series AP get the time
and date from the time server you specify below. The NWA3000-N
series AP requests time and date settings from the time server under
the following circumstances.
• When the NWA3000-N series AP starts up.
• When you click
Apply
or
Synchronize Now
in this screen.
• 24-hour intervals after starting up.
Time Server
Address
Enter the IP address or URL of your time server. Check with your ISP/
network administrator if you are unsure of this information.
Sync. Now
Click this button to have the NWA3000-N series AP get the time and
date from a time server (see the
Time Server Address
field). This
also saves your changes (except the daylight saving settings).
Time Zone Setup
Time Zone
Choose the time zone of your location. This will set the time difference
between your time zone and Greenwich Mean Time (GMT).
Enable Daylight
Saving
Daylight saving is a period from late spring to fall when many
countries set their clocks ahead of normal local time by one hour to
give more daytime light in the evening.
Select this option if you use Daylight Saving Time.
Start Date
Configure the day and time when Daylight Saving Time starts if you
selected
Enable Daylight Saving
. The
at
field uses the 24 hour
format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the
second Sunday of March. Each time zone in the United States starts
using Daylight Saving Time at 2 A.M. local time. So in the United
States you would select
Second
,
Sunday
,
March
and type 2 in the
at
field.
Daylight Saving Time starts in the European Union on the last Sunday
of March. All of the time zones in the European Union start using
Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in
the European Union you would select
Last
,
Sunday
,
March
. The time
you type in the
at
field depends on your time zone. In Germany for
instance, you would type 2 because Germany's time zone is one hour
ahead of GMT or UTC (GMT+1).
Table 70
Configuration > System > Date/Time (continued)
LABEL
DESCRIPTION