Chapter 17 File Manager
NWA3000-N Series User’s Guide
244
• If there is a
startup-config.conf
, the NWA3000-N series AP checks it for errors
and applies it. If there are no errors, the NWA3000-N series AP uses it and
copies it to the
lastgood.conf
configuration file as a back up file. If there is an
error, the NWA3000-N series AP generates a log and copies the
startup-
config.conf
configuration file to the
startup-config-bad.conf
configuration
file and tries the existing
lastgood.conf
configuration file. If there isn’t a
lastgood.conf
configuration file or it also has an error, the NWA3000-N series
AP applies the
system-default.conf
configuration file.
• You can change the way the
startup-config.conf
file is applied. Include the
setenv-startup stop-on-error off
command. The NWA3000-N series AP
ignores any errors in the
startup-config.conf
file and applies all of the valid
commands. The NWA3000-N series AP still generates a log for any errors.
Figure 113
Maintenance > File Manager > Configuration File
Do not turn off the NWA3000-N series AP while configuration file
upload is in progress.