![background image](/i/zyxel/149189/zyxel-nwa3550-n/h/zyxel-nwa3550-n-110.png)
Chapter 8 LAN Setting
NWA3000-N Series User’s Guide
110
8.2.1 Add or Edit a DNS Setting
Use this screen to configure a DNS server entry for the LAN. Click
Configuration
> LAN Setting
and then click the
Add
button or select a DNS server entry from
the list and click the
Edit
button to access this screen.
Figure 42
Configuration > LAN Setting > Add
The following table describes the labels in this screen.
DNS Server
This is the IP address of a DNS server. This field displays
N/A
if you
have the NWA3000-N series AP get a DNS server IP address from the
ISP dynamically but the LAN interface is using a static IP address.
VLAN Settings
Management
VLAN ID
Enter a VLAN ID for the NWA3000-N series AP.
As Native VLAN
Select this option to treat this VLAN ID as a VLAN created on the
NWA3000-N series AP and not one assigned to it from outside the
network.
Apply
Click
Apply
to save your changes back to the NWA3000-N series AP.
Reset
Click
Reset
to return the screen to its last-saved settings.
Table 34
Configuration > LAN Setting (continued)
LABEL
DESCRIPTION
Table 35
Configuration > LAN Setting > Add
LABEL
DESCRIPTION
Type
Select
User-Defined
to manually enter a DNS server’s IP address.
Select
From DHCP
to dynamically get a DNS server address from a
DHCP server.
DNS Server
This appears when you set the
Type
to
User-Defined
. Enter the IP
address of a DNS server.
OK
Click
OK
to save your customized settings and exit this screen.
Cancel
Click
Cancel
to exit this screen without saving