![background image](/i/zyxel/149189/zyxel-nwa3550-n/h/zyxel-nwa3550-n-195.png)
Chapter 15 System
NWA3000-N Series User’s Guide
195
To change your NWA3000-N series AP’s time based on your local time zone and
date, click
Configuration > System > Date/Time
. The screen displays as
shown. You can manually set the NWA3000-N series AP’s time and date or have
the NWA3000-N series AP get the date and time from a time server.
Figure 85
Configuration > System > Date/Time
The following table describes the labels in this screen.
Table 70
Configuration > System > Date/Time
LABEL
DESCRIPTION
Current Time and
Date
Current Time
This field displays the present time of your NWA3000-N series AP.
Current Date
This field displays the present date of your NWA3000-N series AP.
Time and Date
Setup
Manual
Select this radio button to enter the time and date manually. If you
configure a new time and date, time zone and daylight saving at the
same time, the time zone and daylight saving will affect the new time
and date you entered. When you enter the time settings manually, the
NWA3000-N series AP uses the new setting once you click
Apply
.
New Time (hh-
mm-ss)
This field displays the last updated time from the time server or the
last time configured manually.
When you set
Time and Date Setup
to
Manual
, enter the new time
in this field and then click
Apply
.