![background image](/i/zyxel/149189/zyxel-nwa3550-n/h/zyxel-nwa3550-n-096.png)
Chapter 6 Monitor
NWA3000-N Series User’s Guide
96
6.8.1 Legacy Device Info Add or Edit
Use this screen to configure an entry for linking to a compatible legacy AP’s Web
Configurator. The legacy AP must also be in controller mode. Click
Monitor >
Wireless > Rogue AP
> Legacy Device Info
and then click the
Add
button or
select a radio profile from the list and click the
Edit
button to access this screen.
Figure 35
Monitor > Wireless > Legacy Device Info > Add
The following table describes the labels in this screen.
6.9 View Log
Log messages are stored in two separate logs, one for regular log messages and
one for debugging messages. In the regular log, you can look at all the log
messages by selecting
All Logs
, or you can select a specific category of log
messages (for example, user). You can also look at the debugging log by selecting
Debug Log
. All debugging messages have the same priority.
To access this screen, click
Monitor > Log
. The log is displayed in the following
screen.
IP
This is the IP address of the legacy AP.
Description
This is manually entered information about the legacy AP represented by
this entry.
Table 29
Monitor > Wireless > Legacy Device Info (continued)
LABEL
DESCRIPTION
Table 30
Monitor > Wireless > Legacy Device Info
LABEL
DESCRIPTION
Device IP
Address
Enter the legacy AP’s IP address.
Description
Enter a description to help you identify the legacy AP.
OK
Click
OK
to
save your changes back to the NWA3000-N series AP.
Cancel
Click
Cancel
to exit this screen without saving your changes.