Инструкция для ZYXEL NWA3550-N

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Appendix A Log Descriptions

NWA3000-N Series User’s Guide

293

Master configuration

is the same with

Backup. Skip updating

it.

The System Startup configuration file synchronized from the
Master is the same with the one in the Backup, so the
configuration does not have to be updated.

%s file not existed,

Skip syncing it for %s

There is no file to be synchronized from the Master when
syncing a object (AV/AS/IDP/Certificate/System
Configuration), But in fact, there should be something in the
Master for the device to synchronize with, 1st %s: The
syncing object, 2ed %s: The feature name for the syncing
object.

Master firmware

version can not be

recognized. Stop

syncing from Master.

Synchronizing stopped because the firmware version file was
not found in the Master. A Backup device only synchronizes
from the Master if the firmware versions are the same
between the Master and the Backup.

Device HA Sync has

failed when syncing %s

for %s due to bad

\"Sync Password\".

The synchronization password was incorrect when attempting
to synchronize a certain object (AV/AS/IDP/Certificate/
System Configuration).

1st %s: The object to be synchronized, 2ed %s: The feature
name for the object to be synchronized.

Device HA Sync has

failed when syncing %s

for %s due to bad

\"Sync From\" or

\"Sync Port\".

The Sync From IP address or Sync Port may be incorrect
when synchronizing a certain object (AV/AS/IDP/Certificate/
System Configuration).

Device HA Sync has

failed when syncing %s

for %s.

Synchronization failed when synchronizing a certain object
(AV/AS/IDP/Certificate/System Configuration) due to an
unknown reason, 1st %s: The object to be synchronized, 2ed
%s: The feature name for the object to be synchronized.

Sync Failed: Cannot

connect to Master when

syncing %s for %s.

Synchronization failed because the Backup could not connect
to the Master. The object to be synchronized, 2ed %s: The
feature name for the object to be synchronized.

Backup firmware

version can not be

recognized. Stop

syncing from Master.

The firmware version on the Backup cannot be resolved to
check if it is the same as on the Master. A Backup device only
synchronizes from the Master if the Master and the Backup
have the same firmware versions.

Sync failed: Remote

Firmware Version

Unknown

The firmware version on the Master cannot be resolved to
check if it is the same as on the Master. A Backup device only
synchronizes from the Master if the Master and the Backup
have the same firmware versions.

Master firmware

version should be the

same with Backup.

The Backup and Master have different firmware versions. A
Backup device only synchronizes from the Master if the
Master and the Backup have the same firmware versions.

Update %s for %s has

failed.

Updating a certain object failed when updating (AS/AV/IDP/
Certificate/System Configuration). 1st %s: The object to be
synchronized, 2ed %s: The feature name for the object to be
synchronized.

Update %s for %s has

failed: %s.

Updating a certain object failed when updating (AS/AV/IDP/
Certificate/System Configuration) due to some reason. 1st
%s: The object to be synchronized, 2ed %s: The feature
name for the object to be synchronized.

Table 102

Device HA Logs (continued)

LOG MESSAGE

DESCRIPTION