![background image](/i/zyxel/149189/zyxel-nwa3550-n/h/zyxel-nwa3550-n-220.png)
Chapter 15 System
NWA3000-N Series User’s Guide
220
15.9.4 Adding or Editing an SNMPv3 User Profile
This screen allows you to add or edit an SNMPv3 user profile. To access this
screen, click the
Configuration > System > SNMP
screen’s
Add
button or
select a SNMPv3 user profile from the list and click the
Edit
button.
Figure 104
Configuration > System > SNMP > Add
Set Community Enter the
Set community
, which is the password for incoming Set
requests from the management station. The default is private and allows
all requests.
SNMPv3
Select this to allow SNMP managers using SNMPv3 to access the
NWA3000-N series AP.
Add
Click this to create a new entry. Select an entry and click
Add
to create
a new entry after the selected entry.
Edit
Double-click an entry or select it and click
Edit
to be able to modify the
entry’s settings.
Remove
To remove an entry, select it and click
Remove
. The NWA3000-N series
AP confirms you want to remove it before doing so. Note that
subsequent entries move up by one when you take this action.
#
This the index number of an SNMPv3 user profile.
User Name
This is the name of the user for which this SNMPv3 user profile is
configured.
Authentication
This field displays the type of authentication the SNMPv3 user must use
to connect to the NWA3000-N series AP using this SNMPv3 user profile.
Privacy
This field displays the type of encryption the SNMPv3 user must use to
connect to the NWA3000-N series AP using this SNMPv3 user profile.
Privilege
This field displays whether the SNMPv3 user can have read-only or read
and write access to the NWA3000-N series AP using this SNMPv3 user
profile.
Apply
Click
Apply
to save your changes back to the NWA3000-N series AP.
Reset
Click
Reset
to return the screen to its last-saved settings.
Table 78
Configuration > System > SNMP (continued)
LABEL
DESCRIPTION