Chapter 12 AP Profile
NWA3000-N Series User’s Guide
159
12.3.2.1 Add/Edit Security Profile
This screen allows you to create a new security profile or edit an existing one. To
access this screen, click the
Add
button or select a security profile from the list
and click the
Edit
button.
Note: This screen’s options change based on the Security Mode selected. Only the
default screen is displayed here.
Figure 71
SSID > Security Profile > Add/Edit Security Profile
The following table describes the labels in this screen.
Table 57
SSID > Security Profile > Add/Edit Security Profile
LABEL
DESCRIPTION
Profile Name
Enter up to 31 alphanumeric characters for the profile name. This
name is only visible in the Web Configurator and is only for
management purposes. Spaces and underscores are allowed.
Security Mode
Select a security mode from the list:
wep
,
wpa
,
wpa2
, or
wpa2-
mix
.
802.1X
Select this to enable 802.1x secure authentication.
Radius Server
Type
Select internal to use the NWA3000-N series AP’s internal
authentication database, or external to use an external RADIUS server
for authentication.
Primary /
Secondary Radius
Server Activate
Select this to have the NWA3000-N series AP use the specified
RADIUS server.
Radius Server
IP Address
Enter the IP address of the RADIUS server to be used for
authentication.
Radius Server
Port
Enter the port number of the RADIUS server to be used for
authentication.
Radius Server
Secret
Enter the shared secret password of the RADIUS server to be used for
authentication.