Инструкция для ZYXEL NWA3550-N

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 21 Troubleshooting

NWA3000-N Series User’s Guide

275

The commands in my configuration file or shell script are not working properly.

• In a configuration file or shell script, use “#” or “!” as the first character of a

command line to have the NWA3000-N series AP treat the line as a comment.

• Your configuration files or shell scripts can use “exit” or a command line

consisting of a single “!” to have the NWA3000-N series AP exit sub command

mode.

• Include

write

commands in your scripts. Otherwise the changes will be lost

when the NWA3000-N series AP restarts. You could use multiple

write

commands in a long script.

Note: “exit” or “!'” must follow sub commands if it is to make the NWA3000-N series

AP exit sub command mode.

I cannot get the firmware uploaded using the commands.

The Web Configurator is the recommended method for uploading firmware. You
only need to use the command line interface if you need to recover the firmware.
See the CLI Reference Guide for how to determine if you need to recover the
firmware and how to recover it.

My packet capture captured less than I wanted or failed.

The packet capture screen’s

File Size

sets a maximum size limit for the total

combined size of all the capture files on the NWA3000-N series AP, including any
existing capture files and any new capture files you generate. If you have existing
capture files you may need to set this size larger or delete existing capture files.

The NWA3000-N series AP stops the capture and generates the capture file when
either the capture files reach the

File Size

or the time period specified in the

Duration

field expires.

My earlier packet capture files are missing.

New capture files overwrite existing files of the same name. Change the

File

Suffix

field’s setting to avoid this.