![background image](/i/zyxel/149189/zyxel-nwa3550-n/h/zyxel-nwa3550-n-267.png)
NWA3000-N Series User’s Guide
267
C
H A P T E R
2 1
Troubleshooting
21.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
NWA3000-N series AP Access and Login
•
•
•
Resetting the NWA3000-N series AP
21.2 Power, Hardware Connections, and LEDs
The NWA3000-N series AP does not turn on. None of the LEDs turn on.
1
Make sure you are using the power adaptor included with the NWA3000-N series
AP or a PoE power injector.
2
Make sure the power adaptor or PoE power injector is connected to the NWA3000-
N series AP and plugged in to an appropriate power source. Make sure the power
source is turned on.
3
Disconnect and re-connect the power adaptor or PoE power injector.
4
Inspect your cables for damage. Contact the vendor to replace any damaged
cables.
5
If none of these steps work, you may have faulty hardware and should contact
your NWA3000-N series AP vendor.