![background image](/i/epson/156188/epson-stylus-pro-9000/h/epson-stylus-pro-9000-037.png)
1-22
1-22
|
Handling Paper
Setting Paper Configurations
When you use non-EPSON paper or other media, you may need to register
the paper’s thickness and drying time. The only way to tell if you need to do
this is by experimentation. When you’re using a paper stock or other
printing material for the first time, always test it on a small print job. If the
ink smears or printing is blurred, you need to register the paper’s drying time
and thickness. On EPSON media, ink dries immediately.
You can register the thickness and drying time for up to four types of paper
or other media. Then you can select the registered values whenever you print
on that particular stock. Drying time determines how long the print head
will pause between passes.
Registering Paper Thickness and Drying Time
Follow these steps to register a new paper stock:
1. Press the
SelecType
button until
PAPER CONFIG. MENU
appears on
the display.
2. Press the
Item
button.
PAPER NUMBER=STD*
appears on the display.
3. If you’re registering your first roll or batch of paper, press the
+
button
to select
PAPER NUMBER=1
.
For subsequent rolls, continue pressing the
+
button to select the
number you want to register. Then press
Enter
.
4. Press the
Item
button.
THICK. PAT=PRINT
appears on the display.
Press
Enter
to print the paper thickness test pattern. You may see
PAPER THICK. NO.=1
on the display.
Following is a sample pattern:
Note
It’s a good idea to keep a
list of your registered
paper types and
numbers.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17