![background image](/i/epson/156188/epson-stylus-pro-9000/h/epson-stylus-pro-9000-081.png)
4-12
4-12
|
Resolving Problems
3. Open the lower cover if necessary.
4. Carefully pull down the jammed paper.
TURN PWR OFF AND ON
is
displayed on the control panel.
5. Close the lower cover, if necessary, then press the
Power
button to turn
the printer off. Press it again to turn it back on.
6. Make sure the
Paper Out
light is on and
LOAD PAPER
is displayed on
the control panel. Then reload your paper.
Note
If you have two rolls of
paper installed, make
sure you secure the roll
that you are not using
with the roll paper belt.
See page 1-8 for more
information.