![background image](/i/epson/156188/epson-stylus-pro-9000/h/epson-stylus-pro-9000-061.png)
3-10
3-10
|
Maintaining and Transporting the Printer
Replacing the Paper Cutter Blade
If you notice that your paper isn’t cut cleanly, the cutter blade may need to
be replaced. You can also check the status of your cutter by printing the
status check sheet or using the Printer Status menu on the control panel. See
page 2-3 or 2-4 for instructions.
To obtain a new cutter blade (part number C815131), contact your dealer.
To replace the cutter blade, you first need to remove the used blade, as
described in the following section.
Removing the Used Cutter Blade
Make sure the printer is on, then follow these steps to remove the blade:
1. Press the
SelecType
button repeatedly until
CUTTER REPLACE
MENU
appears on the display.
2. Press the
Item
button.
CUT. REPLACE=EXEC.
appears on the display.
Warning
Be careful not to cut
yourself while replacing the
paper cutter blade.
Paper Out
Roll
Cutter Off
Roll
Auto Cut
+
Item
Paper Source
SelecType