![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-149.png)
2. Turn the ignition ON.
3. Push the memory switch (1 or 2) fully
for at least 1 second.
The driver’s seat, steering column and
outside mirrors will move to the memo-
rized position with the indicator light
flashing, and then the light will stay on
for approximately 5 seconds.
ENTRY/EXIT FUNCTION
This system is designed so that the driv-
er’s seat, steering column and door mir-
rors will automatically move when the au-
tomatic transmission selector lever is in
the P (Park) position. This allows the
driver to get into and out of the driver’s
seat more easily.
The driver’s seat will slide backward and
the steering wheel will move up:
O
When the driver’s door is opened after
removing the key from the ignition
switch or the ignition switch (if so
equipped), or returning the ignition
switch to lock position.
O
When the driver’s door is opened with
the key turned to LOCK.
O
When the key is turned from ACC to
LOCK or returning the ignition switch
to lock position with the driver’s door
open.
The driver’s seat and steering wheel will
return to the previous position:
O
When the key is inserted into the igni-
tion switch or the ignition switch (if so
equipped) is pushed in after closing
the door.
O
When the driver’s door is closed with
the key turned to LOCK.
O
When the key or the ignition switch is
turned from ACC to ON with the driv-
er’s door open.
The entry/exit feature can be adjusted or
canceled. See “Vehicle electronic sys-
tems” in the “4. Display screen, heater,
air conditioner and audio systems” sec-
tion of this manual.
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function
will not work even if it has been set. After
reconnecting the battery or replacing the
fuse, open and close the driver’s door
several times after inserting the electronic
key
into
the
ignition
switch.
The
entry/exit function will be activated.
System operation
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
O
when the vehicle speed is above 4
MPH (7 km/h).
O
when any two or more of the memory
switches are simultaneously pushed
while the automatic drive positioner is
operating.
O
when the adjusting switch for the driv-
er’s seat is turned on while the auto-
matic drive positioner is operating.
O
when the memory switch 1 or 2 is not
pushed for at least 1 second.
O
when the seat has been already
moved to the memorized position.
O
when no seat position is stored in the
memory switch.
The automatic drive positioner system can
be adjusted and canceled. See “Auto-
matic seat slide in getting off” and “Lift
steering column when exiting vehicle” in
the “4. Display screen, heater, air condi-
tioner and audio systems” section.
Pre-driving checks and adjustments
3-33
w
06.6.26/S50-D/V5.0
X