![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-262.png)
Operating conventional (fixed
speed) cruise control mode
To turn on the conventional (fixed speed)
cruise control mode,
push and hold the
MAIN switch
q
A
for longer than about 1.5
seconds.
When pushing the MAIN switch on, the In-
telligent Cruise Control system display
and the CRUISE indicator light (Green) in
the instrument cluster come on. After you
hold the MAIN switch on for longer than
about 1.5 seconds, the Intelligent Cruise
Control system display goes out. The
CRUISE indicator stays lit. You can now
set your desired cruising speed. Pushing
the MAIN switch again will turn the
system completely off.
When the ignition switch is turned off, the
system is also automatically turned off.
To use the Intelligent Cruise Control
again, quickly push and release the MAIN
switch (vehicle-to-vehicle distance control
mode) or push and hold it (conventional
cruise control mode) again to turn it on.
CAUTION
To avoid accidentally engaging cruise con-
trol, make sure to turn the ON/OFF switch off
when not using the Intelligent Cruise Con-
trol.
To set cruising speed,
accelerate your ve-
hicle to the desired speed, push the
SET/COAST switch and release it. (The
SET indicator light will come on.) Take
your foot off the accelerator pedal. Your
vehicle will maintain the set speed.
O
To pass another vehicle,
depress the
accelerator pedal. When you release
the pedal, the vehicle will return to
the previously set speed.
O
The vehicle may not maintain the set
speed when going up or down steep
hills. If this happens, manually main-
tain vehicle speed.
To cancel the preset speed,
use any of the
following methods:
a) Push the CANCEL button. The SET indi-
cator light will go out.
b) Tap the brake pedal. The SET indicator
light will go out.
c) Turn the MAIN switch off. Both the
CRUISE indicator and SET indicator
lights will go out.
To reset at a faster cruising speed,
use one
of the following three methods:
a) Depress the accelerator pedal. When
the vehicle attains the desired speed,
push and release the SET/COAST
switch.
b) Push
and
hold
the
RESUME/
ACCELERATE set switch. When the ve-
hicle attains the speed you desire, re-
lease the switch.
c) Push,
then
quickly
release
the
RESUME/ACCELERATE switch. Each
time you do this, the set speed will in-
crease by about 1 MPH (1.6 km/h).
SSD0551
5-44
Starting and driving
w
06.6.26/S50-D/V5.0
X